Skip to main content
All CollectionsThird-party Apps and HardwareVerifone
Connect Verifone To Shopwave Point Of Sale
Connect Verifone To Shopwave Point Of Sale

How to use Verifone to process your Shopwave card transactions.

Julian Polzella avatar
Written by Julian Polzella
Updated over 6 years ago

What You Need

  • An Apple iPad (Compatible iPads).

  • The Shopwave iPad Point of Sale (POS) application installed (How?).

  • A Shopwave owner/manager account (How?).

  • Verifone VX 680 Payment Terminal.

Initial Setup

  1. Follow the Shopwave POS setup instructions.

  2. Open POS and login.

  3. Place your iPad and Verifone VX 680 on the same network (See Appendix 1: Connecting to Wifi below).

  4. Run through the configuration tasks below to ensure setup is perfect.

Configuration Tasks

  1. Power on the devices and login using your PIN provided to you by Verifone. 

  2. Click Menu, then System, then System Info, which should print out a info slip. If there is no IP address listed (and no SSID listed), then follow the connecting to wifi guide below.

  3. Go to Shopwave POS iPad App, go to Settings, click Payments, and select Ocius.

  4. In the Terminal IP Address field, type the IP Address found on the print out obtained in Step 2.

  5. You are done.


​

Appendix 1: Connecting to Wifi

  1. Shut down your device by pressing and holding the cancel button.

  2. Turn on your device by pressing and holding the enter button.

  3. Click setup, enter your setup PIN (e.g. 2580).

  4. Click Network Settings.

  5. Click Wifi Settings (go to next page if necessary).

  6. Click SSID, enter the case sensitive name of your Wifi network.

  7. Click Encryption, choose the correct type and password for your Wifi Network.

  8. Press the cancel button a few times to return the to main screen (with setup and enter buttons).

  9. Click enter and login using your PIN provided to you by Verifone.

Did this answer your question?